Huge discounts on all 2023 and older products! Call: (858)277-5757; Email: info@wakesports.com Shop Sale

Liquid Force

2024 Liquid Force Inline Pro Wake Shaper 145

$299.99
per 
Shipping calculated at checkout.

Free Shipping on Orders Over $100

INLINE PRO WAKE SHAPER 145

BOOST YOUR BOATS SURFING WAVE

The LF Wakesurf Edge Inline Pro Wake Shaper 145 will make big wakes BIGGER! The Inline Pro 145 requires a flat surface measuring 3" tall by 13" long - hulls with an outward curve of more than 1/4" over 5", this is YOUR shaper!

Adjustable design allows you to shift the WSE location on the fly to fine tune the perfect wave.

  • Large Water Displacement Wing for Max Wave Height! (Face: 9" x 16" = 144sq")
  • Inline Suction Cup Attachment to fit Stepped Hulls with Narrow Strakes or Heavy Curves. 5 2-inch Inline Rubber Suction Cups Secure to Hull
  • Patented Concave Water Channelling Wing
  • Super Strong Suction Cup Attachment! Easy to Adjust on the Fly.
  • Made with Rust-free Materials and FLOATS!
  • Do NOT tether shaper to Boat.
  • Level Load Boat to Keep Nose Down for the Captain's Visibility and a Long Wake
  • Recommend Use with a Ballast System
HOW TO FINE TUNE YOUR WAKE

Don’t settle for just ANY wake. You have the power to form and shape your wake for the most amount of fun possible behind your boat. You just need to know how to distribute your weight (ballast) appropriately on the boat. If you have too much weight just in the back, your wake will be tall and short. If you have too much weight (ballast) in the bow of your boat your wake will be longer but very small with no shape. The key is to balance the weight in the bow and in the back to make that perfect space for the water to converge and form a great wake.

PLACEMENT OF YOUR WAKESURF EDGE

It’s important to note that when your boat is still in the water it sits at a different angle than when your boat is pulling at wake surf speed. Attach your Wakesurf Edge at a slight upward angle to reflect the angle that your boat will travel in during the ride. That will ensure that the face of the Wakesurf Edge is causing optimal water flow obstruction and forming the best possible wave shape. A good rule of thumb on how deep to attach the Wakesurf Edge is to attach it so that 2 or 3 inches of the Wakesurf Edge is sticking out of the water. Remember that the back of the boat sinks down upon acceleratation.

FORWARD ON THE BOAT

Placing the Wakesurf Edge more forward up the boat will cause the wake to be mellower, longer, and have more push.

BACKWARD ON THE BOAT

Placing the Wakesurf Edge all the way back on the boat will cause the wake to be steeper, shorter, and have a deeper pocket.